 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DCConverters TEN30WISeries,30Watt compliant RoHS Features HighPowerDensity:30Wina 51x41x10mm(2"x1.6"x0.4")Package UltraWide4:1InputVoltageRange SingleOutputVoltageModels from1.8to15VDC DualOutputVoltageModels ExtendedOperatingTemperatureRange: -40Cto85C UnderVoltageLockout RemoteOn/Off ShieldedMetalCasewithinsulated Baseplate The TEN 30WI series is a family of high performance 30W dc-dc converters featuring ultra wide 4:1 input voltage ranges in a compact low profile package with industry-standard footprint. A very high efficiency allows operating temperatures up to 85C. A built-in filter for both input and output minimizes the need for external filtering. Further standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. OptionalHeatsink LeadfreeDesign-RoHScompliant 3YearProductWarranty Models Ordercode TEN30-2408WI TEN30-2409WI TEN30-2410WI TEN30-2411WI TEN30-2412WI TEN30-2413WI TEN30-2422WI TEN30-2423WI TEN30-4808WI TEN30-4809WI TEN30-4810WI TEN30-4811WI TEN30-4812WI TEN30-4813WI TEN30-4822WI TEN30-4823WI 18-75VDC 10-40VDC Inputvoltagerange Outputvoltage 1.8 VDC 2.5 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 12 VDC 15 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 12 VDC 15 VDC Outputcurrentmax. 8`000 mA 8'000 mA 6'000 mA 6`000 mA 2'500 mA 2'000 mA 1'250 mA 1'000 mA 8`000 mA 8'000 mA 6'000 mA 6`000 mA 2'500 mA 2'000 mA 1'250 mA 1'000 mA Efficiencytyp. 80 % 85 % 87 % 87 % 87 % 88 % 85 % 86 % 81 % 86 % 87 % 88 % 87 % 88 % 86 % 87 % Page1of7 http://www.tracopower.com DC/DCConverters TEN30WI InputSpecifications Input current at no load 24 Vin: 1.8 Vout models: 2.5/3.3 Vout models: other models: 1.8 Vout models: 2.5/3.3 Vout models: other models: 1.8 Vout models: 2.5/3.3 Vout models: other models: 1.8 Vout models: 2.5 / 3.3 Vout models: other models: 45 mA typ. 60 mA typ. 80 mA typ. 25 mA typ. 40 mA typ. 55 mA typ. 760 mA typ. 1000 mA typ. 1500 mA typ. 390 mA typ. 500 mA typ. 750 mA typ. 5 V/ms, max. (complies with ETS 300 132 part. 4.4) 24 Vin models: 10 VDC / 8 VDC (typ.) 48 Vin models: 18 VDC / 16 VDC (typ.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. EN 55022 level A, FCC part 15, level A with external capacitor (see note 1) EN 61000-4-2, perf. criteria B EN 61000-4-4, perf. criteria B EN 61000-4-5, perf. criteria B 1% 10 % - Input variation Vin min. to Vin max. 0.5 % max. - Load variation 10 - 100%: single output models: 0.5 % max. dual output models: 1.0 % max. - Load cross variation 25 % / 100 % 5 % max. 0.02 % /K 75 mVpk-pk max. 10 ms typ. 300 s typ. indefinite (automatic recovery) 150% of Iout max typ. foldback @ 115C typ 1.8 / 2.5 Vout models: 3.0 / 3.6 V 3.3 / 5.0 Vout models: 3.9 / 6.2 V 12 / 15 Vout models: 15 / 18 V 10% of rated max current (operation at lower load condition will not damage these converters, however, they may not meet all listed specifications) 1.8 / 2.5 Vout models: 3.3 / 5.0 Vout models: 12 / 15 Vout models: 12 / 15 Vout models: 65'000 F max./ 33'000 F max. 19'500 F max./ 10'200 F max. 3'300 F max./ 1'100 F max. 1'000 F max./ 680 F max. (per output) 30Watt 48 Vin: Input current at full load 24 Vin: 48 Vin: Input voltage variation (dv/dt) Start-up voltage / under voltage lockout Surge voltage (100 msec. max.) Conducted noise (input) ESD (input) Fast transient (input) Surge (input) OutputSpecifications Voltage set accuracy Output voltage adjustment Regulation Temperature coefficient Ripple and noise (20 MHz Bandwidth): Start up time (nominal Vin and constant resistive load) Transient response setting time (25% load step change) Short circuit protection Over load protection Thermal shutdown Over voltage protection Minimum load (only for dual output models) Capacitive load All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page2of7 DC/DCConverters TEN30WI GeneralSpecifications Temperature ranges - Operating - Case temperature - Storage - with heat-sink TEN-HS2 - without heat-sink - 40 C ... + 85C + 100 C max. - 55 C ... + 105 C 8.24 K /Watt 10 K /Watt see graphs on page 4 to 6 95 % rel H max. >350'000 h @ + 25C 1`500 VDC >1`000 M Ohm 1000 pF max. 3.5 ... 12 VDC or open circuit. 0 ... 1.2 VDC or short circuit pin 3 and pin 2 3 mA typ. 300 kHz typ. (pulse width modulation PWM) 10-55Hz, 2G, 30 minutes along X,Y,Z UL 60950, EN 60950, IEC 60950 compliance up to 60 VDC input voltage (SELV limit) UL /cUL File E188913 - Input / Output - Input / Output - Input / Output - On: - Off: - Off idle current: 30Watt Thermal impedance Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage (60 sec) Isolation resistance Isolation capacity Remote On/Off Switching frequency Vibration Safety standards Safety approvals Note1: In order to meet conducted emissions EN55022-A and EN55011-A a capacitor between +Vin and -Vin has to be installed. The capacitor should be capable to handle 1 A ripple current. A suggestion is KMF Series of Nippon chemi-con, 220F/100V, ESR 90mOhm. OutputVoltageAdjustment Trimup Trim Trimdown Ru +Vout Rd Trim Ru [kohm]* - Vout Ru [kohm]* output +5% +10% output +5% +10% 1.8V 2.5V 1.2 4.3 0.068 0.82 12V 47 8.2 15V 47 6.8 3.3V 6.8 1.5 5.0V 4.7 0.56 output -5% -10% output -5% -10% 1.8V 1.8 0.1 12V 56 5.6 2.5V 6.8 0.82 15V 56 2.2 3.3V 8.2 0.68 5.0V 5.6 0.68 12V 15V 27 33 2.2 2.7 12V 15V 33 39 2.7 3.3 *approximate values All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page3of7 DC/DCConverters TEN30WI PowerDe-rating 30Watt Natural convection with heat-sink TEN-HS2 Natural convection without heat-sink TEN 30-2408WI 100 100 TEN 30-2409WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 30-2410WI 100 100 TEN 30-2411WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page4of7 DC/DCConverters TEN30WI PowerDe-rating TEN 30-2412WI 100 100 30Watt TEN 30-2413WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 30-2422WI 100 100 TEN 30-2423WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 30-4808WI 100 100 TEN 30-4809WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page5of7 DC/DCConverters TEN30WI PowerDe-rating TEN 30-4810WI 100 100 30Watt TEN 30-4811WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 30-4812WI 100 100 TEN 30-4812WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] TEN 30-4822WI 100 100 TEN 30-4822WI 80 Output Power (%) Output Power (%) -40 -20 0 20 40 60 80 100 80 60 60 40 40 20 20 0 Ambient Temperature [C] 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] http://www.tracopower.com Page6of7 DC/DCConverters TEN30WI PhysicalSpecifications Case material Baseplate material Potting material Weight Soldering temperature copper, nickel plated none conductive FR4 epoxy (UL 94V-0 -rated) 48 g (1.69 oz) max. 265 C / 10 sec. 30Watt OutlineDimensions Pin-Out 10.16 10.16 10.16 7 (0.4) Pin Single +Vin (Vcc) -Vin (GND) No pin + Vout -Vout Trim Dual +Vin (Vcc) -Vin (GND) + Vout Common -Vout 10.16 3 1 (0.4) 40.6 (1.6) 6 5 4 12.7 Bottom view 2 1 2 3 4 5 6 7 (0.4) Remote On/Off 5.08 (0.4) 5.6 10.2 (0.22) (0.4) (0.2) 5.1 45.72 (1.8) 50.8 (2.0) (0.2) (0.5) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitch tolerances: 0.35 (0.014) Case tolerances: 0.5 (0.02) Heat-sinkTEN-HS2 56.0 (2.2) max. Ordercode: TEN-HS2 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Thermal pad Clamp Converter Material: Finish: Weight: Aluminum Anodic treatment (black) 19g (0.67oz) (without converter) 17.2 (0.68) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice Rev. 08/06 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 23.0 (0.9) Page7of7 |
Price & Availability of TEN30-2409WI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |